- Compressors
- Reciprocating compressors
- Screw Compressors
- Blowers
- Pneumatic preparatory groups
- Systems for the recovery of waste heat
- Pipe systems
- Condensation-treatment system
- Compressed Air Tanks
- Nitrogen Generators
- Vacuum machines
- Chillers - Water Coolers
- Dryers for compressed air
- Systems for blow molding of PET bottles
- Total control of compressors
- Compressor pumps
- Packaging
- Stretch wrapping machines
- Shrink wrapping machines
- Strapping machines for plastic strap
- Vertical and horizontal flow packaging machines
- Molding, dosing and sealing machines for food industry
- Machines for surface protection and filling
- Heat sealing machines for plastic bags
- Strapping tools for steel strap
- Strapping tools for plastic strap
- Carton forming and closing machines with adhesive tapes
- Dispensers and sewing machines
- Waste presses
- Consumables
- Fastening systems
- Lifting, handling and weighting equipment
Bench vacuum machine - MVS 31 XP
Bench vacuum machine - MVS 31 XP
Also the kit for the inert gas injection is foreseen as optional. The control panel allows to set up to 10 customized programs. The display shows the oil change need with suitable message.
The membrane switch board is adhesive and stuck on the front of the body; this prevents the entry of liquids into the card.
A next-generation electronic sensor, which analyses the data directly from the card, reads the vacuum grade carried out inside the chamber; it is also possible to calibrate the machine, once it is installed at the final user’s location, to correct any atmospheric pressure changes at the different altitudes.
All Minipack-Torre models are endowed with a safety system against the risk of sealing bars overheating.
FEATURES
- Stainless steel (AISI 304)
- Vacuum cycle stop
- Bags waste film cut
- Aluminium sealing bar
- Digital panel with
- 10 storable programs
- Electronic volumetric sensor
- High density plates
- Transparent lid
- Auto-calibration
- Security for over-current on sealing bar
- Oil level check signal
- CE/ETL/NSF certification
Technical features
Power supply | V | 120/230 |
Phase | ph | 1 |
Power max | kW | 0,9 |
Sealing bars dimensions | mm | 310 (nr.1 frontale / 1 front) |
Vacuum cycle (Vacuum 99,9%) | sec. | Vuoto / vacuum =22 Rientro aria / air re-immission =4 |
Machine dimensions with open hood | mm | 390x499x669 |
Vacuum pump | mc/h | 6 |
Machine dimensions with closed hood | mm | 390x499x345 |
Packed machine dimensions | mm | 610x520x420 |
Machine weight (Net/Gross) | kg | 37/41 |
Useful chamber dimensions (Tank+cover) | mm | 325x243,5 h.158 |