- Compressors
- Reciprocating compressors
- Screw Compressors
- Blowers
- Pneumatic preparatory groups
- Systems for the recovery of waste heat
- Pipe systems
- Condensation-treatment system
- Compressed Air Tanks
- Nitrogen Generators
- Vacuum machines
- Chillers - Water Coolers
- Dryers for compressed air
- Systems for blow molding of PET bottles
- Total control of compressors
- Compressor pumps
- Packaging
- Stretch wrapping machines
- Shrink wrapping machines
- Strapping machines for plastic strap
- Vertical and horizontal flow packaging machines
- Molding, dosing and sealing machines for food industry
- Machines for surface protection and filling
- Heat sealing machines for plastic bags
- Strapping tools for steel strap
- Strapping tools for plastic strap
- Carton forming and closing machines with adhesive tapes
- Dispensers and sewing machines
- Waste presses
- Consumables
- Fastening systems
- Lifting, handling and weighting equipment
RCS HY-Q - Hydraulic scale for trucks
MAIN FUNCTIONS:
- Manual zero correction
- Self-learning zero correction
- Gross/Net weighing (by tare weighing or preset tare entry)
- Total function with five separate registers that can be named by the operator
- Overload indication, based on actual hydraulic pressure, not on calculated weight
- Error message in display
How it works:
Two sensors in a metal strip mounted against the mast measure the lifting and lowering speed of the forks. While the load passes the trajectory between the two sensors, the indicator samples the hydraulic pressure output of the sensor approximately 1000 times and calculates an average value. The weighing is done UP and DOWN: the load is lifted, and then lowered past the two sensors within a predefined speed bandwidth.
RCS Hy-Q from RAVAS - The Mobile Scale Company on Vimeo.