- Compressors
- Reciprocating compressors
- Screw Compressors
- Blowers
- Pneumatic preparatory groups
- Systems for the recovery of waste heat
- Pipe systems
- Condensation-treatment system
- Compressed Air Tanks
- Nitrogen Generators
- Vacuum machines
- Chillers - Water Coolers
- Dryers for compressed air
- Systems for blow molding of PET bottles
- Total control of compressors
- Compressor pumps
- Packaging
- Stretch wrapping machines
- Shrink wrapping machines
- Strapping machines for plastic strap
- Vertical and horizontal flow packaging machines
- Molding, dosing and sealing machines for food industry
- Machines for surface protection and filling
- Heat sealing machines for plastic bags
- Strapping tools for steel strap
- Strapping tools for plastic strap
- Carton forming and closing machines with adhesive tapes
- Dispensers and sewing machines
- Waste presses
- Consumables
- Fastening systems
- Lifting, handling and weighting equipment
FinishPro10
Art. №: 06030061
This 23 Ga. Micro Pinner is the perfect tool for your intricate finish and trim projects. The pins fasten the smallest of decorative trim securely and leave a nearly invisibly hole - no splitting or puttying.
Item #: | 2C0001N |
Firing Mode: | Sequential Actuation Trigger |
Reg. Operating Pressure: | 70-95 psi (4.8-6.5 bar) |
Air Consumption (60 cycles per min.): | (60 cycles per min.): .84 scfm |
Air Inlet: | 1/4" NPT |
Tool Weight: | 2.4 lbs (1.1kg) |
Height: | 6.75" (171mm) |
Length: | 8.89" (225mm) |
Width: | 1.64" (41mm) |
Fastener Capacity: | 110 |
- Extra power - for use with hard wood
- Easy fastener length adjustment
- Rear exhaust
- Low load fastener indicator
- Magazine bumper pad
- Includes case, fittings, wrench and tool oil
- 1-year limited warranty