KAESER сайт

CS199MXL & CS299MXL2

CS199MXL & CS299MXL2

FEATURES OF THE CS199MXL
.Wide joining capacity : 190mm stroke (7’’ ½)
For mouldings up to 150mm wide (6’’) and 112mm high (4’’ 2/5)
. Ultra Powerful Double-action « push and tighten » rebate clamp
Position one of the moulding pieces up to the guide, then lay the second piece roughly place.
The special action of the clamps draws them accurately and firmly together. Indeed, the
clamps literally bite into the rebate of the 2 pieces of mouldings to pull and tighten them very
strongly against each other. This ensures a high quality join every time, even on very wide
mouldings. This is unique to Cassese.
. Clamping of mouldings activated by foot-pedal
.Wedge firing activated by push button
.Automatic position lock
Carriage is locked in position during insertion of wedges allowing for consistent stacking of wedges.
.Built-in extension arms for large frames
.New magnetic XL adjustable top clamp
Quickly adjust hold down height. Just change rubber end for hardwood or softwood. Now
with quick-change magnetic hold-downs.
. No tools required to change wedges’ sizes
Uses only genuine Cassese patented cartridge wedges. They are color coded with a full
range of sizes available (3, 4, 5, 7, 10, 12, & 15 mm) most available in hardwood and softwood
versions. Quality and performance!
. No pressure adjustment required
When changing between softwood and hardwood timber.
. Minimum service required

FEATURES OF THE CS299MXL2
• Wide joining capacity : 190mm stroke (7’’½)
For mouldings up to 150mm wide (6’’) and 112mm high (4’’ 2/5)
• Ultra Powerful Double-action « push and tighten » rebate clamp
Position one of the moulding pieces up to the guide, then lay the second piece
roughly place. The special action of the clamps draws them accurately and firmly
together. Indeed, the clamps literally bite into the rebate of the 2 pieces of mouldings
to pull and tighten them very strongly against each other. This ensures a high quality
join every time, even on very wide mouldings. This is unique to Cassese.
• New retractable Ultra clamp system
Patented “Ultra” clamp system now retracts into table leaving a flat surface.
Great for handling big frames!
• Patented adjustable fences
Adjusts for « less than perfect » 45 cuts and backs not 9 to bottom, in order to
prevent gaps in the top or bottom of the join.
• Clamping of mouldings activated by foot-pedal
• Wedge firing activated by push button
• Automatic position lock
Carriage is locked in position during insertion of nails allowing for consistent
stacking of nails.
• Built-in extension arms for large frames
• New magnetic XL adjustable top clamp
Quickly adjust hold down height. Just change rubber end for hardwood or softwood.
Now with quick-change magnetic hold-downs.
• No tools required to change wedges’ sizes
Uses only genuine Cassese patented cartridge wedges. They are color coded with a
full range of sizes available ( 3, 5, 7, 10, 12, & 15 ) most available in hardwood and
softwood versions. Quality and performance!
• No need to adjust the pressure of the wedge shooting system
When changing between softwood wedges and hardwood wedges
• Minimum service required
CS299MXL2
PNEUMATIC UNDERPINNER
Mouldings
Width 5mm-150mm
Height 7mm-112mm
Smallest Internal Frame size 85mm x 85mm
Weight 60 Kg
Length 490mm
Width 450mm
Height 1100mm
Air supply Compressed air at
7 bars using 5
litres per cycle
CASSESE SARL - 8 rue Denis Papin - Zone Industrielle - 77390 Verneuil l'Etang - France
Tel: + 33 (0) 164 42 49 71/73/74 - Fax: + 33 (0) 1 64 42 58 94 - Web Site : www.cassese.com
The new CS299MXL2 is designed to meet the needs of every framer
looking for high quality joins and comfort of use, thanks to the adjustable
fences and the new patented retractable Ultra clamps.
Z20027 Z1813 Z1814 Z1800 Z1804
Optional Accessories
Z3212
. Patented self-adjusting back supports
• Button to adjust the pressure of the horizontal clamps.
To be used when you replace regular clamps with optional soft rubber clamps or when
you join very softwood moulding.


Производител / Вносител CASSESE Sarl

Изпратете запитване

Запознат съм с Условията за Защита на личните данни *