Bench vacuum machine - MVS 31 XP

Bench vacuum machine - MVS 31 XP
title=title=title=

Bench vacuum machine - MVS 31 XP

Also the kit for the inert gas injection is foreseen as optional. The control panel allows to set up to 10 customized programs. The display shows the oil change need with suitable message.
The membrane switch board is adhesive and stuck on the front of the body; this prevents the entry of liquids into the card.

A next-generation electronic sensor, which analyses the data directly from the card, reads the vacuum grade carried out inside the chamber; it is also possible to calibrate the machine, once it is installed at the final user’s location, to correct any atmospheric pressure changes at the different altitudes. 

All Minipack-Torre models are endowed with a safety system against the risk of sealing bars overheating.

 

FEATURES

  • Stainless steel (AISI 304)
  • Vacuum cycle stop
  • Bags waste film cut
  • Aluminium sealing bar
  • Digital panel with
  • 10 storable programs
  • Electronic volumetric sensor
  • High density plates
  • Transparent lid
  • Auto-calibration
  • Security for over-current on sealing bar
  • Oil level check signal
  • CE/ETL/NSF certification

 

 

Technical features

Power supply V 120/230
Phase ph 1
Power max kW 0,9
Sealing bars dimensions mm 310 (nr.1 frontale / 1 front)
Vacuum cycle (Vacuum 99,9%) sec. Vuoto / vacuum =22 
Rientro aria / air re-immission =4
Machine dimensions with open hood mm 390x499x669
Vacuum pump mc/h 6
Machine dimensions with closed hood mm 390x499x345
Packed machine dimensions mm 610x520x420
Machine weight (Net/Gross) kg 37/41
Useful chamber dimensions (Tank+cover) mm 325x243,5 h.158
Manufacturer / Importer Minipack - Torre S.P.A.

Send inquiry

I am familiar with the Privacy Policy