RCS HY-Q - Hydraulic scale for trucks

RCS HY-Q - Hydraulic scale for trucks


  • Manual zero correction
  • Self-learning zero correction
  • Gross/Net weighing (by tare weighing or preset tare entry)
  • Total function with five separate registers that can be named by the operator
  • Overload indication, based on actual hydraulic pressure, not on calculated weight
  • Error message in display

How it works:

Two sensors in a metal strip mounted against the mast measure the lifting and lowering speed of the forks. While the load passes the trajectory between the two sensors, the indicator samples the hydraulic pressure output of the sensor approximately 1000 times and calculates an average value. The weighing is done UP and DOWN: the load is lifted, and then lowered past the two sensors within a predefined speed bandwidth.


RCS Hy-Q from RAVAS - The Mobile Scale Company on Vimeo.


Manufacturer / Importer Ravas

Send inquiry

I am familiar with the Privacy Policy