- Compressors
- Reciprocating compressors
- Screw Compressors
- Blowers
- Pneumatic preparatory groups
- Systems for the recovery of waste heat
- Pipe systems
- Condensation-treatment system
- Compressed Air Tanks
- Nitrogen Generators
- Vacuum machines
- Chillers - Water Coolers
- Dryers for compressed air
- Systems for blow molding of PET bottles
- Total control of compressors
- Compressor pumps
- Packaging
- Stretch wrapping machines
- Shrink wrapping machines
- Strapping machines for plastic strap
- Vertical and horizontal flow packaging machines
- Molding, dosing and sealing machines for food industry
- Machines for surface protection and filling
- Heat sealing machines for plastic bags
- Strapping tools for steel strap
- Strapping tools for plastic strap
- Carton forming and closing machines with adhesive tapes
- Dispensers and sewing machines
- Waste presses
- Consumables
- Fastening systems
- Lifting, handling and weighting equipment
SFW10XP
Art. №: 06030002
Various SFW10XP models drive staples ranging in length from 5/32" to 5/8" and crowns from 3/16", 3/8", and 1/2".
Item #: | 1D0101N |
Reg. Operating Pressure: | 60-95 psi (4.1-6.5 bar) |
Air Consumption (60 cycles per min.): | (60 cycles per min.): .77 scfm |
Air Inlet: | 1/4" NPT |
Tool Weight: | 2 lbs. (.9kg) |
Height: | 5.8" (151mm) |
Length: | 9.5" (241mm), Double length magazine:14.5" (368.3mm) |
Fastener Capacity: | 110-185 |
- Full 1" lip length
- Rounded steel cap - won't harm fabric
- Rear exhaust - keeps oil off fabric
- Both U.S. and metric skirt guide cast into outer magazine
- No front screw heads - tool glides through fabric
- Compact tool design
- Reload window indicates when to reload fasteners
- 5-year limited warranty