CS88 & CS89

CS88   & CS89

FEATURES OF THE CS88 & CS89 :
• Cassese wedges cartridge system
Easy change of wedge size with no need to adjust or change any part
on the machine. All Cassese underpinners are able to use the full range
of Cassese cartridge wedges in 7 different sizes, available in both
softwood and hardwood.
•Adjustable joining angle
It is possible to adjust the joining angle of the fences to correct the gap
if the cutting angle is not perfectly at 45°.
• Patented self-adjusting fences
Are adaptable to the shape of any moulding profile, to prevent gaps in
the top or bottom of the join.
• Horizontal rebate clamp
Secures the moulding pieces together to ensure perfect alignment of the
mitres while joining.
• Quick-Change top clamp
To adjust between softwood and hardwood and different mouldings'
shapes.
• 2 positioning stops
(front and back) allow wedges to be stacked up, even in hardwood.
• Unique triangular design table
Makes it easy to adapt to the corner of a workbench, which assists in
supporting the frame while joining.
• CS 88 Foot operated
Mobile foot pedal
The pedal position can be easily changed between the back or the front
of the machine, and can also be set up for either left or right foot
operation.
Unique pulley and cable drive system
Multiplies the force applied on the foot pedal more than 3 times, thus
making it easy for the operator to drive wedges into the hardest timbers.
• CS 89 Air operated :
Pneumatic double-stage pedal
Permits the operator to clamp the mouldings and visually check the join
before inserting the wedge.
No pressure adjustment required
When changing between softwood and hardwood.


Manufacturer / Importer CASSESE Sarl

Send inquiry

I am familiar with the Privacy Policy