News

Stretch wrapping machines promo

Stretch wrapping machines promo

New perspectives on the costs of packaging in 2016

calculation_2.18.15.jpgNew perspectives on the costs of packaging in 2016


What is the cost per packaged unit? Most of responsible for packaging processes in production professionals don’t know the exact price they are paying for this processes. This price per unit is one of the key indicators that can provide informed choice of supplier of packaging technology and solutions.

Over the last few years experts in Mava Industrial realized a series of projects in which customers were consulted in selection of appropriate packaging consumables, engineering of whole chain of molding and packaging machines, installing, maintaining and service of machinery. All these efforts were based on one main goal – managing of better price of packaging per unit. That is why we proudly offer our complex packaging services in order to give best solution for this important part of the production process.

Mava Industrial is more than 16 years a leading company in the field of packaging solutions. The company delivers packaging machines, tools and consumables from leading European manufacturers.







Mava Industrial took part of "World of milk" 2015

Mava Industrial took part of exhibition "World of milk 2015" which was held from 11th to 14th of November 2015 in Inter Expo Center, Sofia. During the exhibiton our visitors saw machines for dosing and packaging of milk and milk products, from ILPRA Italy.

Machines were presented by Gianluca Montesano - Regional Manager for Central and Eastern Europe, which was available to our guests for questions and advices about the characteristics and applicability of the presented machinery and equipment.

You can see the machines here: 

http://www.mavaindustrial.com/index.php?lang=2&m=320&category=21&pc=2


Photos from exhibition you can see in gallery below:

002.jpg   001.jpg003.jpg   005.jpg     004.jpg   008.jpg006.jpg

Mava Industrial took part of "Back to business cocktail"

Mava Industrial took part of "Back to business cocktail", orgnized by Hellenic business council in Bulgaria

6774_image_2.jpg
In the last day of Spetember 2015 in the cozy indoor and outdoor setting of Burger In House, Sofia Ring Mall took place the Traditional HBCB Back to Business Networking Cocktail. The event was honored by more than 200 guests – members and friends of the Council among whom was also the Ambassador of Greece to Bulgaria H.E. Dimostenis Stoidis.

The event was opened by Mr. Minko Gerdjikov - Executive Director of the Hellenic Business Council in Bulgaria. MAVA Industrial as a recent member of the organization, was represented by Mr. Yagos Vamvacas and Mr. Daniel Troyanski, who have made many useful contacts with current and potential partners of the company.

Guests had an opportunity to share experiences from their summer vacation as well as plans and expectations for the new business season while building new contacts and discussing recent economic and political news and changes.

All pictures from the event you can see here: http://www.hbcbg.com/en/news/member-news/hbcb-back-to-business-cocktail-a-strong-start-of-the-new-business-year-7129.html
   

 6720_image_2.jpg       6673_image_2.jpg       6752_image_2.jpg       6720_image_2.jpg

Our partner Sealed AIR again in Fortune 500

Our partner Sealed AIR again in Fortune 500

Sealed_Air.jpgSealed Air Corporation, was named as one of the top Fortune 500 Companies in the publication’s annual list, out today.  This marks the eighteenth consecutive year the Company has made the list.  Sealed Air is number 366 on this year’s Fortune 500 list, and shows a profit increase of 107% over last year’s reporting.

The list is compiled by ranking companies based on their total revenue for the most recent fiscal year.  Companies who are incorporated in the U.S., operate in the U.S., and file financial statements with a government agency are included in the listing.  “Once again, we are proud to be a part of the Fortune 500,” stated Jerome A. Peribere, Sealed Air CEO.

Sealed Air Corporation creates a world that feels, tastes and works better. In 2014, the Company generated revenue of approximately $7.8 billion by helping our customers achieve their sustainability goals in the face of today’s biggest social and environmental challenges. Our portfolio of widely recognized brands, including Cryovac® brand food packaging solutions, Bubble Wrap® brand cushioning and Diversey® cleaning and hygiene solutions, enables a safer and less wasteful food supply chain, protects valuable goods shipped around the world, and improves health through clean environments. Sealed Air has approximately 24,000 employees who serve customers in 175 countries.

Sealed Air solutions in Bulgaria you can find by Mava Industrial:

http://www.mavaindustrial.com/index.php?lang=2&m=320&category=22&pc=2

10 tips for helping your compressed air system survive the summer

10 tips for helping your compressed air system survive the summer
Heat_summer.jpg
Hot weather can put a lot of stress on compressed air systems, and as temperatures rise we see many maintenance problems revealed.  Here are tips for avoiding costly downtime this summer.

1. Change the oil. 

Summer heat and humidity exact a heavy toll on the compressors oil. High heat and humidity can reduce the life of your oil by as much as half in some cases. Give your compressor a fighting chance by changing the oil and filter before the summer bake starts.  Changing oil/fluid on schedule maintains proper viscosity for better lubrication and removes moisture, acids, wear metals and other contaminants.



2. Check the fluid system. 

To ensure proper cooling and lubrication, and to prevent unscheduled downtime, ensure there are no restrictions in the compressor’s  fluid circulation.  

3. Change the inlet filter. 

Changing the inlet filter on schedule will keep compression efficiency up and maintain proper operating temperature.  Changing the air filter will also keep your oil cleaner longer, providing better protection to airend bearings.   

4. Check your belts and couplings. 

Over time, heat can degrade polymer based belts and couplings.  Belts should be checked for cracks and wear.  Worn belts reduce efficiency.  If you have no record or recollection of when they were last changed, it’s time to switch them out or at least buy a spare to be on hand.  Direct drive couplings are designed to last much longer but should also be checked for signs of wear to avoid unexpected downtime.  

5. Ventilate the compressor room. 

Poor ventilation can increase operating temperature, reduce oil life and decrease compressor efficiency.  Make sure that you are giving your units enough fresh, cool air to the compressor.  The compressor room should have slightly positive pressure.  Properly sized louvers and fans may do the job.  Consider adding duct work to remove exhaust heat from the room.  If you have duct-work with thermostatic controls, make sure it is working properly.   Also check other equipment in the compressor room to make sure it is not adding excess heat. 

6. Clean the coolers. 

Keep the fluid and after coolers free of dirt/debris to maintain lowest possible operating and compressed air discharge temperatures.  This will make dryers more effective and extend fluid life.  Change or clean cooler filter mats if you have them.   Keeping the coolers clean is one of the most important things that you can do during the summer months.

7. Compressed air treatment equipment. 

A majority of air treatment equipment is rated at 7 bar inlet, 35°C inlet temperatures, and 35°C ambient temperatures. During hot summer months, an increase in any of these conditions can often act to decrease the capacity of the equipment.  Keeping the aftercooler clean is the first step. 

8. Check your electrical cabinet. 

Dirt and dust can form an insulating layer and build up heat on electrical components.  Be sure the cabinet fan works and to clean or replace the filters on the electrical cabinet if present. Use appropriate precautions when cleaning the electrical cabinet! 

9. Maintain your dryer. 

Refrigerated dryers work best when they have a steady supply of clean and cool air. Make sure that your dryer is well ventilated and getting the coolest air possible.  Clean the condenser.  If it is stopped up with dirt and debris it can’t do its job and may cause the dryer to overheat.  Also check the refrigerant level. 

10. Check all drains on tanks, dryer and filters. 

Your dryers and filters work hard to remove the extra water that occurs during the hot, humid summer months.  Make sure that your drains are functioning properly so that they get that water out of your compressed air.  Many drains have test buttons.   Adjust timer settings on timed drains if you have them.



Technomebel 2015 – many new friends and clients of Mava Industrial

Last week Mava Industrial was part of Technomebel 2015 – leading exhibition in the field of furniture industry. The exhibition was held from 21 to 25 April at Inter Expo Center – Sofia.

During the exhibition MAVA Industrial provide an opportunity for all visitors to see a wide range of machines and solutions for the furniture industry:

  • Packaging machines for furniture, furniture plates and components
  • Product care solutions for safety transportation
  • Heat sealing machines for bags and packages
  • Stretch wrapping machines
  • Wide range of fastening systems
  • Industrial compressors

More than 1,000 visitors passed through our stand at Technomebel 2015. It was a great pleasure for our team to show them how our machines and solutions can respond to their production needs.

For more than 15 years the team of Mava Industrial provides Bulgarian industry complete solutions for packaging, tools and compressed air, subordinated to the principles of saving energy and reducing consumption levels, with ultimate objective – to protect the environment.


Technomebel_13.jpg   Technomebel_16.jpg   Technomebel_4.jpg

Technomebel_3.jpg   Technomebel_7.jpg   Technomebel_9.jpg

Technomebel_8.jpg

MAVA INDUSTRIAL will take part in Technomebel 2015


Visit us on “Technomebel” exhibition at Inter Expo Center -  Sofia, 21 to 25 April 2015

 54e43e62d42fd0de789ad4b5 EN.gif

Participation of MAVA INDUSTRIAL SA in international specialized exhibition
"Technomebel" in Inter Expo Center Sofia
21 to 25 April 2015


Dear partners,
MAVA Industrial SA will participate in the forthcoming international specialized exhibition Technomebel, which will be held from 21 to 25 April 2015 at Inter Expo Center - Sofia.

During the exhibition will present the latest and most appropriate solutions in the field of Packaging equipment, pneumatic  tools and compete solutions for your business.

We'll be pleased to see you at the stand C2 in Hall 2.

See you there!

 









Visit us on, "MachTech & Innotech"at Inter Expo Center Sofia 11 to 13 March 2015

Participation of MAVA INDUSTRIAL SA in international specialized exhibition
" MachTech & Innotech" in Inter Expo Center Sofia
11 to 13 March 2015 
728x90-machtech-innotech-3-C5-en.jpg

Dear partners,

MAVA Industrial SA will participate in the forthcoming international specialized exhibition MachTech & Innotech,
which will be held from 11 to 13 March 2015 in Inter Expo Center - Sofia.

During the exhibition will present the latest and most appropriate solutions in the field of compressed air equipment and equipment for water treatment plants, presented by our partner Kaeser Kompressoren- Germany, as well pneumatic tools by Rami Yokota .

We will be at your disposal and will be pleased to see you at the stand C5 in Hall 3.

See you there!

Technomebel 2014


MAVA INDUSTRIAL participated in the specialized exhibition Technomebel, which was held for the third consecutive year together with the exhibition The World of Furniture. 

Техномебел


Техномебел


MAVA INDUSTRIAL presented the latest solutions in the field of compressed air equipment, packaging machines, pneumatic tools and supplies.


Kaeser компресори

Kaeser SM 12, Aircenter SM 15, refrigeration dryer Kaeser TBH 14


Minipack
Minipack RP 55


Ravas
iForks, Ravas 1, Ravas 2100


Robopac
Robopac Ecoplat PPS, Robot S6


sealed air
Fill-Air Cyclone, Sealed Air New Air I.B. Express


strapack
Strapack JK-5, Strapack i-10


omer пневматични инструменти
OMER


senco пневматични инструменти
SENCO


teufelberger чембер
TEUFELBERGER











Visit us on, "Meatmania" and "The world of milk"at Inter Expo Center Sofia November 5 to November 8 2014

Participation of MAVA INDUSTRIAL SA in international specialized exhibition
" Meatmania" and "The world of milk" in Inter Expo Center Sofia
5 to 8 November 2014 
New banner.jpg

Dear partners,

MAVA Industrial SA will participate in the forthcoming international specialized exhibition Meatmania and The world of milk,
which will be held from 5 to 8 November 2014 in Inter Expo Center - Sofia, with " Bulpek "
" Interfood & Drink ", " Salon de Vin ."
During the exhibition will present the latest and most appropriate solutions in the field of packaging machinery for the food and non-food industries , compressor equipment , nitrogen generators and a new generation of measurement systems.

We will be at your disposal and will be pleased to see you at the stand B8 in Hall 1 and B6 in Hall 2.

See you there!